Brother DCP8080DN Trouble Error Codes

Brother DCP8080DN Trouble Error Codes

Code	Description	Causes
1E	The drum unit reached its life and requires replacement.	Replace the drum unit with a new one.
1F	Two or more optional trays are installed	1 Connector: 54702-1219 failure. 2 Main PCB failure
24	Internal temperature sensor failure	1 Harness connection failure of internal temperature sensor. 2 Internal temperature sensor failure. 3 Main PCB failure
35	EEPROM of main PCB failure	1 Main PCB failure
36	HVPS PCB during standby failure	1 HVPS PCB unit failure. 2 Main PCB failure
3B	Main PCB RAM failure	1 Main PCB failure
3C	EEPROM writing error (Not applicable)	1 Main PCB failure
3D	EEPROM reading error (Not applicable)	1 Main PCB failure
3E	EEPROM bus error (Not applicable)	1 Main PCB failure
44	No toner cartridge	1 Dirt on electrodes on toner cartridge and machine body. 2 HVPS PCB unit failure. 3 Main PCB failure
50	The drum unit reached its life and requires replacement.	Replace the drum unit with a new one.
51	The paper feed kit MP reached its life and requires replacement.	1 Replacement time of the paper feed kit MP.
52	The paper feed kit T1 reached its life and requires replacement.	1 Replacement time of the paper feed kit T1.
53	The paper feed kit T2 reached its life and requires replacement.	1 Replacement time of the paper feed kit T2.
54	The fuser unit reached its life and requires replacement.	1 Replacement time of the fuser unit

Code	Description	Causes
55	The laser unit reached its life and requires replacement.	1 Replacement time of the laser unit
56	Back cover is opened	1 Harness connection failure of relay rear PCB ASSY. 2 Relay rear PCB ASSY failure. 3 Main PCB failure
57	Paper jam (Duplex tray)	1 Duplex feed ASSY failure. 2 Main PCB failure. 3 Plate gear damaged.
58	Fuser unit failure	1 Fuser unit failure. 2 Main PCB failure.
59	Fuser unit failure (Detect fuser failure at start-up)	1 Fuser unit failure. 2 Main PCB failure.
63	Toner life end	1 Relay front PCB ASSY failure. 2 Main PCB failure
67	Toner low	1 Toner sensor PCB ASSY failure. 2 Main PCB failure
68	Temperature rise when heater is off	1 Fuser unit failure. 2 Main PCB failure
69	Mis-connect center thermistor connector	1 Harness connection failure of fuser unit. 2 Harness connection failure of relay rear PCB ASSY. 3 Fuser unit failure. 4 Main PCB failure
6A	Fuser temperature does not reach 60°C within the specified time (center thermistor)	1 Fuser unit failure. 2 Main PCB failure.
6B	Fuser temperature does not reach 100°C within the specified time (center thermistor)	1 Fuser unit failure. 2 Main PCB failure.
6C	Fuser temperature exceeds its higher limit (center thermistor)	1 Fuser unit failure. 2 Main PCB failure.
6D	Fuser temperature exceeds its lower limit (center thermistor)	1 Fuser unit failure. 2 Main PCB failure.
6E	Fuser temperature does not rise (center thermistor)	1 Fuser unit failure. 2 Main PCB failure.
6F	Hardware detects extremely high temperature of the center or side thermistors	1 Fuser unit failure. 2 Main PCB failure.

Code	Description	Causes
70	Fuser motor error	1 Motor failure. 2 Main PCB failure.
71	Laser unit polygon motor failure	1 Laser unit failure. 2 Main PCB failure.
72	Laser beam emission failure	1 Laser unit failure. 2 Main PCB failure.
75	Sensor of the inside temperature for detection detected higher than normal temperature	1 Thermistor ASSY failure. 2 Main PCB failure.
76	Rapid temperature rising failure (center thermistor)	1 Fuser unit failure. 2 Main PCB failure.
78	Rapid temperature falling failure (center thermistor)	1 Fuser unit failure. 2 Main PCB failure.
7A	No detection of main motor synchronous signal	1 Motor failure. 2 Main PCB failure.
7D	Dirt on corona wire (detect discharge error)	1 Dirt or dust on drum unit electrodes. 2 Charge HVPS PCB failure. 3 Main PCB failure
7F	Fax paper setting mismatch (The setting paper becomes besides the A4/Letter/Legal/ Folio) (Not applicable)	1 Registration front actuator 2 catching on some position. 2 Main PCB failure
80	Fax paper size is incorrect (The paper is smaller 10mm than the letter size (11inch) in Fax List/ Report)	1 Registration front actuator 2 catching on some position. 2 Main PCB failure
83	Failure of discharge detection (Printing becomes unable until the drum is replaced with a new one.) (Discharge detection becomes unable until the drum counter reaches the double of the drum life.)	1 Main PCB failure.
84	Paper jam	1 Harness connection failure of relay rear PCB ASSY. 2 Eject actuator catching on some position. 3 Paper eject sensor PCB failure. 4 Main PCB failure
85	Tray 1 is not installed into the machine	1 T1 PE/edge sensor PCB/ T2 PE/edge sensor PCB failure. 2 Harness connection failure of T1 PE/edge sensor PCB/ T2 PE/edge sensor PCB. 3 Main PCB failure. 4 Connector 55533-1219 failure (only Tray 2)
86	Tray 2 is not installed into the machine	1 T1 PE/edge sensor PCB/ T2 PE/edge sensor PCB failure. 2 Harness connection failure of T1 PE/edge sensor PCB/ T2 PE/edge sensor PCB. 3 Main PCB failure. 4 Connector 55533-1219 failure (only Tray 2)
88	Paper jam inside the machine	1 Harness connection failure of high voltage power supply PCB ASSY. 2 Registration rear actuator catching on some position. 3 Registration rear sensor failure. 4 Main PCB failure

Code	Description	Causes
89	Incorrect paper size in duplex printing	1 Registration rear sensor failure. 2 Main PCB failure
8A	Paper jam in Tray 1	1 Dirt on edge sensor. 2 Harness connection failure of high voltage power supply PCB ASSY. 3 Paper feeding kit worn out (MP/ T1/ T2). 4 Registration front sensor failure. 5 Main PCB failure
8B	Paper jam in Tray 2	1 Dirt on edge sensor. 2 Harness connection failure of high voltage power supply PCB ASSY. 3 Paper feeding kit worn out (MP/ T1/ T2). 4 Registration front sensor failure. 5 Main PCB failure
8C	Paper jam in MP Tray	1 Dirt on edge sensor. 2 Harness connection failure of high voltage power supply PCB ASSY. 3 Paper feeding kit worn out (MP/ T1/ T2). 4 Registration front sensor failure. 5 Main PCB failure
8D	Paper jam near eject tray	1 Duplex sensor failure. 2 Main PCB failure
99	Specified paper size is not supported for duplex printing (Duplex)	1 Main PCB failure
9F	Paper empty	1 Dirt on PE sensor. 2 Harness connection failure of PE EG sensor PCB ASSY. 3 PE actuator catching on some position. 4 PE sensor failure. 5 HVPS PCB unit failure. 6 Main PCB failure
A1	Front cover opened	1 Harness connection failure of front cover sensor ASSY. 2 Part pressing the front cover sensor ASSY is broken, which is provided at the left side of the front cover inside. 3 Front cover sensor failure. 4 Relay front PCB failure. 5 Main PCB failure
A2	During scanning, 90 cm or longer of a document is detected	1 Document rear actuator catching on some position. 2 Document rear sensor failure. 3 Main PCB failure
A3	Document rear sensor is not turned on when feeding the document	1 Document rear actuator catching on some position. 2 Document rear sensor failure. 3 Main PCB failure
A4	ADF cover opened	1 ADF cover open sensor arm catching on some position. 2 ADF cover is changed in shape or cracked.e position. 3 ADF cover open sensor failure. 4 ADF relay PCB failure. 5 Main PCB failure.
A5	Fax scanning error (Warning) (First time)	1 Scanning failure.
A6	Fax scanning error (Error) (Second time)	1 Document scanner unit failure. 2 Main PCB failure
A7	Scanning color parameter file failure	1 Scanner module failure. 2 Main PCB failure
A8	Scanning color parameter matching error	1 Scanner module failure. 2 Main PCB failure

Code	Description	Causes
AD	DMA transfer error	1 Scanner module failure. 2 Main PCB failure
AE	Document scanner home position sensor is not turned on.	- CCD model: 1 Home position sensor harness not connected correctly. 2 Drive PCB failure. 3 Belt broken. 4 Home position sensor failure. 5 Scanner motor failure. 6 Tab of CCD module broken. 7 Main PCB failure. - CIS model: 1 FFC cable not connected correctly. 2 Drive PCB failurelure. 3 Document scanner unit failure. 4 Main PCB failure
AF	Document scanner home position sensor is not turned off.	- CCD model: 1 Home position sensor harness not connected correctly. 2 Drive PCB failureunit failure. 3 Belt broken. 4 Home position sensor failure. 5 Scanner motor failure failure. 6 Main PCB failure - CIS model: 1 FFC cable not connected correctly. 2 Drive PCB failurelure failure. 3 Document scanner unit failure. 4 Main PCB failure
B0	Document scanner unit FFC detection error	1 Harness for scanner module not connected correctly. 2 Scanner harness broken. 3 Main PCB failure
B1	Dark level offset data level error for scanning	1 CCD unit failure. 2 Main PCB failure.
B2	Gain control data level error for scanning	1 CCD unit failure. 2 Main PCB failure.
B7	A/D converter standard voltage failure; at High side	1 CCD unit failure. 2 Main PCB failure.
B8	A/D converter standard voltage failure; at Low side	1 CCD unit failure. 2 Main PCB failure.
B9	Scanning light adjustment error is detected	1 Scanner module failure. 2 Main PCB failure
BB	White level data error	1 Scanner module failure. 2 Main PCB failure
BD	Black level data error	1 Scanner module failure. 2 Main PCB failure
BF	ADF duplex scanning cannot be implemented due to too long document	1 Document front actuator 2 not operating smoothly or catching in some position. 2 Document front sensor 2 failure.
C0	New toner detection lever failure	1 Power off or front cover opened while detecting a new toner cartridge. 2 New toner sensor failure.
C7	Insufficient DIMM Memory	1 Main PCB failure.
C8	Secure print data full	1 Main PCB failure.

Code	Description	Causes
C9	DIMM error	1 Main PCB failure.
CA	Excess current to USB device that is front side of the machine	1 Harness connection failure of USB host relay PCB ASSY. 2 USB host relay PCB failure. 3 Main PCB failure.
CD	Drum unit is not installed into the machine	1 Dirt on electrodes on drum unit and machine body. 2 HVPS PCB unit failure. 3 Main PCB failure
D1	Modem initialization failed	1 Main PCB failure
DD	Fuser error other than 58, 59, 68, 69, 6A, 6B, 6C, 6D, 6E, 6F, 76, 78, DE and E2 are occurred	1 Fuser unit failure. 2 Main PCB failure. 3 LVPS PCB failure.
DE	Central temperature of heat roller detected the temperature that was lower than 60°C)	1 Relay rear PCB ASSY connection failure. 2 Fuser unit failure. 3 Main PCB failure.
E0	Program error	1 Program failure. 2 Main PCB failure
E1	Main PCB failure	1 Main PCB failure
E2	Central temperature of heat roller exceeds 280°C	1 Fuser unit failure. 2 Main PCB failure
E6	EEPROM error	1 Main PCB failure
EB	The data reading error for E2PROM	1 Main PCB failure
EC	Fuser fan failure	1 Main fan failure. 2 Main PCB failure
ED	Wireless LAN connection failure between W-LAN PCB and access point	1 WLAN PCB failure. 2 Main PCB failure
EE	Wireless LAN is unable to communicate between W-LAN PCB and access point	1 WLAN PCB failure. 2 Main PCB failure
EF	LVPS PCB failure	1 LVPS PCB failure. 2 Main PCB failure.

Code	Description	Causes
F8	Battery connection error	1 Battery harness connection failure. 2 Main PCB failure. 3 Battery failure.
F9	EEPROM customizing code error	1 Turn the power off, when the Maintenance mode 74 PARAMETER INIT is in progress. 2 Main PCB failure
FF	Excess current to USB HOST PCB error	1 USB HOST PCB failure. 2 Main PCB failure

Download Service Manual,Error Codes,
Download Laptop,download drivers, download laptop Drivers,ALL LAPTOP DRIVER. DELL DRIVERS, HP DRIVERS, TOSHIBA DRIVERS, ACER DRIVERS , LENOVO DRIVERS , SONY DRIVERS, SUMSUNG DRIVERS, ASUS DRIVERS,Acer Drivers, Mutoh Drivers,Apple Drivers,OCE Drivers,Brother Drivers,OKI Drivers,Canon Drivers Olivetti Drivers,Duplo Drivers,Panasonic Drivers,Encad-Kodak Drivers,Printronix Drivers,Epson Drivers,Ricoh Drivers,HP Drivers,Riso Drivers,KIP Drivers,Konica Drivers,Samsung Drivers,Konica-Minolta Drivers,Sanyo Drivers,Kyocera-Mita Drivers,Sharp Drivers,Lexmark Drivers,Sony Drivers,LG Drivers,Star '

A Note S37SP Drivers for Windows XP & Vist,

Drivers,Mimaki Drivers,Toshiba Drivers,Minolta Drivers,Various Drivers,Muratec Drivers,Zebra Drivers

Brother DCP8070D Trouble Error Codes

Brother DCP8070D Trouble Error Codes

Code	Description	Causes
1E	The drum unit reached its life and requires replacement.	Replace the drum unit with a new one.
1F	Two or more optional trays are installed	1 Connector: 54702-1219 failure. 2 Main PCB failure
24	Internal temperature sensor failure	1 Harness connection failure of internal temperature sensor. 2 Internal temperature sensor failure. 3 Main PCB failure
35	EEPROM of main PCB failure	1 Main PCB failure
36	HVPS PCB during standby failure	1 HVPS PCB unit failure. 2 Main PCB failure
3B	Main PCB RAM failure	1 Main PCB failure
3C	EEPROM writing error (Not applicable)	1 Main PCB failure
3D	EEPROM reading error (Not applicable)	1 Main PCB failure
3E	EEPROM bus error (Not applicable)	1 Main PCB failure
44	No toner cartridge	1 Dirt on electrodes on toner cartridge and machine body. 2 HVPS PCB unit failure. 3 Main PCB failure
50	The drum unit reached its life and requires replacement.	Replace the drum unit with a new one.
51	The paper feed kit MP reached its life and requires replacement.	1 Replacement time of the paper feed kit MP.
52	The paper feed kit T1 reached its life and requires replacement.	1 Replacement time of the paper feed kit T1.
53	The paper feed kit T2 reached its life and requires replacement.	1 Replacement time of the paper feed kit T2.
54	The fuser unit reached its life and requires replacement.	1 Replacement time of the fuser unit

Code	Description	Causes
55	The laser unit reached its life and requires replacement.	1 Replacement time of the laser unit
56	Back cover is opened	1 Harness connection failure of relay rear PCB ASSY. 2 Relay rear PCB ASSY failure. 3 Main PCB failure
57	Paper jam (Duplex tray)	1 Duplex feed ASSY failure. 2 Main PCB failure. 3 Plate gear damaged.
58	Fuser unit failure	1 Fuser unit failure. 2 Main PCB failure.
59	Fuser unit failure (Detect fuser failure at start-up)	1 Fuser unit failure. 2 Main PCB failure.
63	Toner life end	1 Relay front PCB ASSY failure. 2 Main PCB failure
67	Toner low	1 Toner sensor PCB ASSY failure. 2 Main PCB failure
68	Temperature rise when heater is off	1 Fuser unit failure. 2 Main PCB failure
69	Mis-connect center thermistor connector	1 Harness connection failure of fuser unit. 2 Harness connection failure of relay rear PCB ASSY. 3 Fuser unit failure. 4 Main PCB failure
6A	Fuser temperature does not reach 60°C within the specified time (center thermistor)	1 Fuser unit failure. 2 Main PCB failure.
6B	Fuser temperature does not reach 100°C within the specified time (center thermistor)	1 Fuser unit failure. 2 Main PCB failure.
6C	Fuser temperature exceeds its higher limit (center thermistor)	1 Fuser unit failure. 2 Main PCB failure.
6D	Fuser temperature exceeds its lower limit (center thermistor)	1 Fuser unit failure. 2 Main PCB failure.
6E	Fuser temperature does not rise (center thermistor)	1 Fuser unit failure. 2 Main PCB failure.
6F	Hardware detects extremely high temperature of the center or side thermistors	1 Fuser unit failure. 2 Main PCB failure.

Code	Description	Causes
70	Fuser motor error	1 Motor failure. 2 Main PCB failure.
71	Laser unit polygon motor failure	1 Laser unit failure. 2 Main PCB failure.
72	Laser beam emission failure	1 Laser unit failure. 2 Main PCB failure.
75	Sensor of the inside temperature for detection detected higher than normal temperature	1 Thermistor ASSY failure. 2 Main PCB failure.
76	Rapid temperature rising failure (center thermistor)	1 Fuser unit failure. 2 Main PCB failure.
78	Rapid temperature falling failure (center thermistor)	1 Fuser unit failure. 2 Main PCB failure.
7A	No detection of main motor synchronous signal	1 Motor failure. 2 Main PCB failure.
7D	Dirt on corona wire (detect discharge error)	1 Dirt or dust on drum unit electrodes. 2 Charge HVPS PCB failure. 3 Main PCB failure
7F	Fax paper setting mismatch (The setting paper becomes besides the A4/Letter/Legal/ Folio) (Not applicable)	1 Registration front actuator 2 catching on some position. 2 Main PCB failure
80	Fax paper size is incorrect (The paper is smaller 10mm than the letter size (11inch) in Fax List/ Report)	1 Registration front actuator 2 catching on some position. 2 Main PCB failure
83	Failure of discharge detection (Printing becomes unable until the drum is replaced with a new one.) (Discharge detection becomes unable until the drum counter reaches the double of the drum life.)	1 Main PCB failure.
84	Paper jam	1 Harness connection failure of relay rear PCB ASSY. 2 Eject actuator catching on some position. 3 Paper eject sensor PCB failure. 4 Main PCB failure
85	Tray 1 is not installed into the machine	1 T1 PE/edge sensor PCB/ T2 PE/edge sensor PCB failure. 2 Harness connection failure of T1 PE/edge sensor PCB/ T2 PE/edge sensor PCB. 3 Main PCB failure. 4 Connector 55533-1219 failure (only Tray 2)
86	Tray 2 is not installed into the machine	1 T1 PE/edge sensor PCB/ T2 PE/edge sensor PCB failure. 2 Harness connection failure of T1 PE/edge sensor PCB/ T2 PE/edge sensor PCB. 3 Main PCB failure. 4 Connector 55533-1219 failure (only Tray 2)
88	Paper jam inside the machine	1 Harness connection failure of high voltage power supply PCB ASSY. 2 Registration rear actuator catching on some position. 3 Registration rear sensor failure. 4 Main PCB failure

Code	Description	Causes
89	Incorrect paper size in duplex printing	1 Registration rear sensor failure. 2 Main PCB failure
8A	Paper jam in Tray 1	1 Dirt on edge sensor. 2 Harness connection failure of high voltage power supply PCB ASSY. 3 Paper feeding kit worn out (MP/ T1/ T2). 4 Registration front sensor failure. 5 Main PCB failure
8B	Paper jam in Tray 2	1 Dirt on edge sensor. 2 Harness connection failure of high voltage power supply PCB ASSY. 3 Paper feeding kit worn out (MP/ T1/ T2). 4 Registration front sensor failure. 5 Main PCB failure
8C	Paper jam in MP Tray	1 Dirt on edge sensor. 2 Harness connection failure of high voltage power supply PCB ASSY. 3 Paper feeding kit worn out (MP/ T1/ T2). 4 Registration front sensor failure. 5 Main PCB failure
8D	Paper jam near eject tray	1 Duplex sensor failure. 2 Main PCB failure
99	Specified paper size is not supported for duplex printing (Duplex)	1 Main PCB failure
9F	Paper empty	1 Dirt on PE sensor. 2 Harness connection failure of PE EG sensor PCB ASSY. 3 PE actuator catching on some position. 4 PE sensor failure. 5 HVPS PCB unit failure. 6 Main PCB failure
A1	Front cover opened	1 Harness connection failure of front cover sensor ASSY. 2 Part pressing the front cover sensor ASSY is broken, which is provided at the left side of the front cover inside. 3 Front cover sensor failure. 4 Relay front PCB failure. 5 Main PCB failure
A2	During scanning, 90 cm or longer of a document is detected	1 Document rear actuator catching on some position. 2 Document rear sensor failure. 3 Main PCB failure
A3	Document rear sensor is not turned on when feeding the document	1 Document rear actuator catching on some position. 2 Document rear sensor failure. 3 Main PCB failure
A4	ADF cover opened	1 ADF cover open sensor arm catching on some position. 2 ADF cover is changed in shape or cracked.e position. 3 ADF cover open sensor failure. 4 ADF relay PCB failure. 5 Main PCB failure.
A5	Fax scanning error (Warning) (First time)	1 Scanning failure.
A6	Fax scanning error (Error) (Second time)	1 Document scanner unit failure. 2 Main PCB failure
A7	Scanning color parameter file failure	1 Scanner module failure. 2 Main PCB failure
A8	Scanning color parameter matching error	1 Scanner module failure. 2 Main PCB failure

Code	Description	Causes
AD	DMA transfer error	1 Scanner module failure. 2 Main PCB failure
AE	Document scanner home position sensor is not turned on.	- CCD model: 1 Home position sensor harness not connected correctly. 2 Drive PCB failure. 3 Belt broken. 4 Home position sensor failure. 5 Scanner motor failure. 6 Tab of CCD module broken. 7 Main PCB failure. - CIS model: 1 FFC cable not connected correctly. 2 Drive PCB failurelure. 3 Document scanner unit failure. 4 Main PCB failure
AF	Document scanner home position sensor is not turned off.	- CCD model: 1 Home position sensor harness not connected correctly. 2 Drive PCB failureunit failure. 3 Belt broken. 4 Home position sensor failure. 5 Scanner motor failure failure. 6 Main PCB failure - CIS model: 1 FFC cable not connected correctly. 2 Drive PCB failurelure failure. 3 Document scanner unit failure. 4 Main PCB failure
B0	Document scanner unit FFC detection error	1 Harness for scanner module not connected correctly. 2 Scanner harness broken. 3 Main PCB failure
B1	Dark level offset data level error for scanning	1 CCD unit failure. 2 Main PCB failure.
B2	Gain control data level error for scanning	1 CCD unit failure. 2 Main PCB failure.
B7	A/D converter standard voltage failure; at High side	1 CCD unit failure. 2 Main PCB failure.
B8	A/D converter standard voltage failure; at Low side	1 CCD unit failure. 2 Main PCB failure.
B9	Scanning light adjustment error is detected	1 Scanner module failure. 2 Main PCB failure
BB	White level data error	1 Scanner module failure. 2 Main PCB failure
BD	Black level data error	1 Scanner module failure. 2 Main PCB failure
BF	ADF duplex scanning cannot be implemented due to too long document	1 Document front actuator 2 not operating smoothly or catching in some position. 2 Document front sensor 2 failure.
C0	New toner detection lever failure	1 Power off or front cover opened while detecting a new toner cartridge. 2 New toner sensor failure.
C7	Insufficient DIMM Memory	1 Main PCB failure.
C8	Secure print data full	1 Main PCB failure.

Code	Description	Causes
C9	DIMM error	1 Main PCB failure.
CA	Excess current to USB device that is front side of the machine	1 Harness connection failure of USB host relay PCB ASSY. 2 USB host relay PCB failure. 3 Main PCB failure.
CD	Drum unit is not installed into the machine	1 Dirt on electrodes on drum unit and machine body. 2 HVPS PCB unit failure. 3 Main PCB failure
D1	Modem initialization failed	1 Main PCB failure
DD	Fuser error other than 58, 59, 68, 69, 6A, 6B, 6C, 6D, 6E, 6F, 76, 78, DE and E2 are occurred	1 Fuser unit failure. 2 Main PCB failure. 3 LVPS PCB failure.
DE	Central temperature of heat roller detected the temperature that was lower than 60°C)	1 Relay rear PCB ASSY connection failure. 2 Fuser unit failure. 3 Main PCB failure.
E0	Program error	1 Program failure. 2 Main PCB failure
E1	Main PCB failure	1 Main PCB failure
E2	Central temperature of heat roller exceeds 280°C	1 Fuser unit failure. 2 Main PCB failure
E6	EEPROM error	1 Main PCB failure
EB	The data reading error for E2PROM	1 Main PCB failure
EC	Fuser fan failure	1 Main fan failure. 2 Main PCB failure
ED	Wireless LAN connection failure between W-LAN PCB and access point	1 WLAN PCB failure. 2 Main PCB failure
EE	Wireless LAN is unable to communicate between W-LAN PCB and access point	1 WLAN PCB failure. 2 Main PCB failure
EF	LVPS PCB failure	1 LVPS PCB failure. 2 Main PCB failure.

Code	Description	Causes
F8	Battery connection error	1 Battery harness connection failure. 2 Main PCB failure. 3 Battery failure.
F9	EEPROM customizing code error	1 Turn the power off, when the Maintenance mode 74 PARAMETER INIT is in progress. 2 Main PCB failure
FF	Excess current to USB HOST PCB error	1 USB HOST PCB failure. 2 Main PCB failure

Download Service Manual,Error Codes,
Download Laptop,download drivers, download laptop Drivers,ALL LAPTOP DRIVER. DELL DRIVERS, HP DRIVERS, TOSHIBA DRIVERS, ACER DRIVERS , LENOVO DRIVERS , SONY DRIVERS, SUMSUNG DRIVERS, ASUS DRIVERS,Acer Drivers, Mutoh Drivers,Apple Drivers,OCE Drivers,Brother Drivers,OKI Drivers,Canon Drivers Olivetti Drivers,Duplo Drivers,Panasonic Drivers,Encad-Kodak Drivers,Printronix Drivers,Epson Drivers,Ricoh Drivers,HP Drivers,Riso Drivers,KIP Drivers,Konica Drivers,Samsung Drivers,Konica-Minolta Drivers,Sanyo Drivers,Kyocera-Mita Drivers,Sharp Drivers,Lexmark Drivers,Sony Drivers,LG Drivers,Star '

A Note S37SP Drivers for Windows XP & Vist,

Drivers,Mimaki Drivers,Toshiba Drivers,Minolta Drivers,Various Drivers,Muratec Drivers,Zebra Drivers

Brother DCP8065DN Trouble Error Codes

Brother DCP8065DN Trouble Error Codes

Code	Description	Causes
56	The fuser cover is opened.
57	Duplex jam	- Paper is remained. - Main PCB defective - Duplex reverse gear damaged - Duplex solenoid defective
5A	High-voltage power supply PCB malfunction
5B	New toner sensor lever error (New toner sensor stays on)	New toner actuator lever broken New toner sensor defective
5C	Optional lower tray (LT-5300) error	Two or more optional lower trays are installed.
5D	Duplex printing cannot be implemented.
60	Recording paper is stacked too much in the eject section.	Stacker sensor defective
68	Side thermistor high temperature error	Side thermistor short circuit
69	Side thermistor low temperature error	Side thermistor break
6A	Heater warming-up timeout error. (Heater does not reach 60 within 12 second.)	Thermistor defective Halogen lamp defective
6B	Heater warming-up timeout error. (Heater does not reach 100 within 9 second.)	Thermistor defective Halogen lamp defective
6C	Heater temperature exceeds the maximum high temperature. (270 or more is detected for 1sec.)	Thermistor defective Power supply PCB defective
6E	Heater temperature does not go up enough.	Halogen lamp defective Power supply PCB defective
6F	Heater hard limiter operates.	Thermistor defective. Power supply PCB defective
71	Scanner motor does not synchronize with the reference clock. Laser unit defective Main PCB defective

Code	Description	Causes
72	Cannot detect Beam Detect signal.	Laser unit defective Main PCB defective
73	The drum unit is not mounted.
74	Toner empty	Toner sensor defective Toner empty
75	In casing temperature error.	In casing temperature sensor defective
76	Heater overheats.	Thermistor in the fuser unit defective PS PCB unit defective Main PCB defective
77	The power supply is turned off when the error 76 or 78 occurs.
78	Temperature of the heater does not rise.	Poor connection in the harness of the halogen lamp Halogen lamp defective Thermistor defective PS PCB unit defective Main PCB defective
79	Thermistor in the machine defective	Extremely high or low temperature inside the machine
7A	Main motor does not synchronize with the reference clock.	Main PCB defective Main motor defective
7B	ASIC error on the main PCB.
7D	Dust on the drum.	Corona wire is dirty.
80	At the start of FAX message printing, the controller detects that paper is smaller than A4 size in width.	Paper smaller than the specified size loaded in the paper tray Main PCB defective
81	Recording paper jam.
82	Recording paper jam in paper pull-in operation
83	Recording paper jam. (The registration sensor comes ON too early in the paper feeding operation.)	Paper is not correctly set in the paper tray Separation pad damaged Registration sensor actuator unhooked Main PCB defective

Code	Description	Causes
84	Recording paper jam. (The registration sensor stays ON after completion of paper ejection operation.)	The paper ejection roller does not rotate correctly Foreign materials in the paper path. Registration sensor actuator caught on the surrounding parts Registration sensor broken Main PCB defective
85	No paper tray1 loaded.	Tray 1 is not closed completely.
86	No paper tray2 loaded.	Tray 2 is not closed completely.
88	Recording paper jam. (Even after paper pulling-in operation, the registration sensor is still OFF.)	Recording paper not loaded correctly Registration sensor broken Separation pad damaged Objects, such as bits of paper or chips, are in the paper tray or paper tray Paper pick up roller defective Paper feed motor broken Main PCB defective
8A	Jam tray1
8B	Jam tray2
8C	Jam MP tray
A1	Front cover opened.	Hook of the front open switch on the front cover broken
A2	Document length exceeding the scan limitation. During scanning, 90 cm or longer of a document is detected. During document feeding or ejecting, 400 cm or longer of a document is detected.	Front open switch broken Document jam
A3	The document rear sensor does not come ON during document pull-in operation.	Document jam Document rear sensor actuator caught on the surrounding parts Document rear sensor broken
A4	50% or more faulty of white level data.
A5	FAX scanning failure. (1st time)	CCD defective White-level reference film stained in the scanner cover Main PCB defective
A6	FAX scanning failure. (retry)
AA	The document cover is opened when the ADF is used.	Document cover sensor defective
AC	Less than 50% faulty of white level data.

Code	Description	Causes
AF	The scanner is locked.	Scanner lock lever is not released. Scanner lock lever defective
B1	Dark level offset data level error for scanning.	CCD defective Main PCB defective
B2	Gain control data level error for scanning.	CCD defective Main PCB defective
B3	Scan area left edge detection error.	Black markings on the white-level reference film inside the scanner top cover. CCD defective Main PCB defective
B4	Scan area right edge detection error.	Black markings on the white-level reference film inside the scanner top cover. CCD defective Main PCB defective
B5	Horizontal scanning edge reduction detection error in scanning area setting.	Black markings on the white-level reference film inside the scanner top cover. CCD defective Main PCB defective
B6	Horizontal scanning edge enlargement detection error in scanning area setting	Black markings on the white-level reference film inside the scanner top cover. CCD defective Main PCB defective
B7	A/D converter reference voltage error (at High level).	Main PCB defective
B8	A/D converter reference voltage error (at Low level).
B9	Light emission intensity error of the LED array (Exceeding the upper limit).	CCD defective Main PCB defective
BB	White level data error.	CCD defective Main PCB defective
BD	Black level data error.	CCD defective Main PCB defective
BE	Scan starting edge detection error.	Black markings on the white-level reference film inside the scanner top cover. CCD defective Main PCB defective
BF	Duplex scanning cannot be implemented due to too long document.	- The document is too long. - ADF front sensor 2 defective
D0 … DF	Modem error.	Main PCB defective

Code	Description	Causes
E6	Write error in EEPROM.	Main PCB defective
E8	Data scanning error during transmission.	CCD defective Main PCB defective
EA	Document removed at phase B.	Document front sensor actuator caught on the surrounding parts Sensor PCB defective Main PCB defective

Download Service Manual,Error Codes,
Download Laptop,download drivers, download laptop Drivers,ALL LAPTOP DRIVER. DELL DRIVERS, HP DRIVERS, TOSHIBA DRIVERS, ACER DRIVERS , LENOVO DRIVERS , SONY DRIVERS, SUMSUNG DRIVERS, ASUS DRIVERS,Acer Drivers, Mutoh Drivers,Apple Drivers,OCE Drivers,Brother Drivers,OKI Drivers,Canon Drivers Olivetti Drivers,Duplo Drivers,Panasonic Drivers,Encad-Kodak Drivers,Printronix Drivers,Epson Drivers,Ricoh Drivers,HP Drivers,Riso Drivers,KIP Drivers,Konica Drivers,Samsung Drivers,Konica-Minolta Drivers,Sanyo Drivers,Kyocera-Mita Drivers,Sharp Drivers,Lexmark Drivers,Sony Drivers,LG Drivers,Star '

A Note S37SP Drivers for Windows XP & Vist,

Drivers,Mimaki Drivers,Toshiba Drivers,Minolta Drivers,Various Drivers,Muratec Drivers,Zebra Drivers

Brother DCP8060 Trouble Error Codes

Brother DCP8060 Trouble Error Codes

Code	Description	Causes
56	The fuser cover is opened.
57	Duplex jam	- Paper is remained. - Main PCB defective - Duplex reverse gear damaged - Duplex solenoid defective
5A	High-voltage power supply PCB malfunction
5B	New toner sensor lever error (New toner sensor stays on)	New toner actuator lever broken New toner sensor defective
5C	Optional lower tray (LT-5300) error	Two or more optional lower trays are installed.
5D	Duplex printing cannot be implemented.
60	Recording paper is stacked too much in the eject section.	Stacker sensor defective
68	Side thermistor high temperature error	Side thermistor short circuit
69	Side thermistor low temperature error	Side thermistor break
6A	Heater warming-up timeout error. (Heater does not reach 60 within 12 second.)	Thermistor defective Halogen lamp defective
6B	Heater warming-up timeout error. (Heater does not reach 100 within 9 second.)	Thermistor defective Halogen lamp defective
6C	Heater temperature exceeds the maximum high temperature. (270 or more is detected for 1sec.)	Thermistor defective Power supply PCB defective
6E	Heater temperature does not go up enough.	Halogen lamp defective Power supply PCB defective
6F	Heater hard limiter operates.	Thermistor defective. Power supply PCB defective
71	Scanner motor does not synchronize with the reference clock. Laser unit defective Main PCB defective

Code	Description	Causes
72	Cannot detect Beam Detect signal.	Laser unit defective Main PCB defective
73	The drum unit is not mounted.
74	Toner empty	Toner sensor defective Toner empty
75	In casing temperature error.	In casing temperature sensor defective
76	Heater overheats.	Thermistor in the fuser unit defective PS PCB unit defective Main PCB defective
77	The power supply is turned off when the error 76 or 78 occurs.
78	Temperature of the heater does not rise.	Poor connection in the harness of the halogen lamp Halogen lamp defective Thermistor defective PS PCB unit defective Main PCB defective
79	Thermistor in the machine defective	Extremely high or low temperature inside the machine
7A	Main motor does not synchronize with the reference clock.	Main PCB defective Main motor defective
7B	ASIC error on the main PCB.
7D	Dust on the drum.	Corona wire is dirty.
80	At the start of FAX message printing, the controller detects that paper is smaller than A4 size in width.	Paper smaller than the specified size loaded in the paper tray Main PCB defective
81	Recording paper jam.
82	Recording paper jam in paper pull-in operation
83	Recording paper jam. (The registration sensor comes ON too early in the paper feeding operation.)	Paper is not correctly set in the paper tray Separation pad damaged Registration sensor actuator unhooked Main PCB defective

Code	Description	Causes
84	Recording paper jam. (The registration sensor stays ON after completion of paper ejection operation.)	The paper ejection roller does not rotate correctly Foreign materials in the paper path. Registration sensor actuator caught on the surrounding parts Registration sensor broken Main PCB defective
85	No paper tray1 loaded.	Tray 1 is not closed completely.
86	No paper tray2 loaded.	Tray 2 is not closed completely.
88	Recording paper jam. (Even after paper pulling-in operation, the registration sensor is still OFF.)	Recording paper not loaded correctly Registration sensor broken Separation pad damaged Objects, such as bits of paper or chips, are in the paper tray or paper tray Paper pick up roller defective Paper feed motor broken Main PCB defective
8A	Jam tray1
8B	Jam tray2
8C	Jam MP tray
A1	Front cover opened.	Hook of the front open switch on the front cover broken
A2	Document length exceeding the scan limitation. During scanning, 90 cm or longer of a document is detected. During document feeding or ejecting, 400 cm or longer of a document is detected.	Front open switch broken Document jam
A3	The document rear sensor does not come ON during document pull-in operation.	Document jam Document rear sensor actuator caught on the surrounding parts Document rear sensor broken
A4	50% or more faulty of white level data.
A5	FAX scanning failure. (1st time)	CCD defective White-level reference film stained in the scanner cover Main PCB defective
A6	FAX scanning failure. (retry)
AA	The document cover is opened when the ADF is used.	Document cover sensor defective
AC	Less than 50% faulty of white level data.

Code	Description	Causes
AF	The scanner is locked.	Scanner lock lever is not released. Scanner lock lever defective
B1	Dark level offset data level error for scanning.	CCD defective Main PCB defective
B2	Gain control data level error for scanning.	CCD defective Main PCB defective
B3	Scan area left edge detection error.	Black markings on the white-level reference film inside the scanner top cover. CCD defective Main PCB defective
B4	Scan area right edge detection error.	Black markings on the white-level reference film inside the scanner top cover. CCD defective Main PCB defective
B5	Horizontal scanning edge reduction detection error in scanning area setting.	Black markings on the white-level reference film inside the scanner top cover. CCD defective Main PCB defective
B6	Horizontal scanning edge enlargement detection error in scanning area setting	Black markings on the white-level reference film inside the scanner top cover. CCD defective Main PCB defective
B7	A/D converter reference voltage error (at High level).	Main PCB defective
B8	A/D converter reference voltage error (at Low level).
B9	Light emission intensity error of the LED array (Exceeding the upper limit).	CCD defective Main PCB defective
BB	White level data error.	CCD defective Main PCB defective
BD	Black level data error.	CCD defective Main PCB defective
BE	Scan starting edge detection error.	Black markings on the white-level reference film inside the scanner top cover. CCD defective Main PCB defective
BF	Duplex scanning cannot be implemented due to too long document.	- The document is too long. - ADF front sensor 2 defective
D0 … DF	Modem error.	Main PCB defective

Code	Description	Causes
E6	Write error in EEPROM.	Main PCB defective
E8	Data scanning error during transmission.	CCD defective Main PCB defective
EA	Document removed at phase B.	Document front sensor actuator caught on the surrounding parts Sensor PCB defective Main PCB defective

Download Service Manual,Error Codes,
Download Laptop,download drivers, download laptop Drivers,ALL LAPTOP DRIVER. DELL DRIVERS, HP DRIVERS, TOSHIBA DRIVERS, ACER DRIVERS , LENOVO DRIVERS , SONY DRIVERS, SUMSUNG DRIVERS, ASUS DRIVERS,Acer Drivers, Mutoh Drivers,Apple Drivers,OCE Drivers,Brother Drivers,OKI Drivers,Canon Drivers Olivetti Drivers,Duplo Drivers,Panasonic Drivers,Encad-Kodak Drivers,Printronix Drivers,Epson Drivers,Ricoh Drivers,HP Drivers,Riso Drivers,KIP Drivers,Konica Drivers,Samsung Drivers,Konica-Minolta Drivers,Sanyo Drivers,Kyocera-Mita Drivers,Sharp Drivers,Lexmark Drivers,Sony Drivers,LG Drivers,Star '

A Note S37SP Drivers for Windows XP & Vist,

Drivers,Mimaki Drivers,Toshiba Drivers,Minolta Drivers,Various Drivers,Muratec Drivers,Zebra Drivers